- Published on
Taking the plunge into JS frameworks with Next.JS
Blog post describing why I have rebuilt my personal website with Next.JS and Tailwind.
About
I'm Ryan, a front-end developer based in Leeds, UK. I've been professionally creating websites for around 10 years (along with design and print work within this time).
You can email me at ryan＠ryanfitton.co.uk
- Published on
DIY Doorbell Chime for Hikvision ISAPI with a Raspberry Pi Pico
I have recently purchased a Hikvision DS-KV6113-WPE1(B) doorbell. The doorbell is one of very few PoE doorbells which look good, work well and relatively in expensive. The doorbell also allows the video feed to be viewed over RTSP which integrates well into my DVR system (Shinobi). Recently Hikvision have released firmware (Readme / Firmware) which ...- Published on
Enabling/Disabling Hyper V in Windows 10 for Virtual Box and Docker development
These instructions offer assistance with enabling/disabling Hyper V in Windows 10. I have found it necessary to disable this service for use with Virtaul Box, then re-enabling it for Docker. To disable Hyper V in Windows 10 (e.g. for use with Virtual Box): Ensure virtualisation is supported by your CPU and enabled in the BIOS ...- Published on
Home Network Setup: What's in my rack 2021
Following on from my original post in 2017 and a follow up I made in 2019, I am making this post to show the changes my to my home network. Some parts have not changed. such as; The rack, a 9U with dimensions of 600x600mm. I am still running pfSense on a Qotom Q150P-S08 Mini ...- Published on
Replacing noisy stock fans on a HP 1920-24G-PoE+ Switch (JG925A)
I have recently been researching VLANs for my home network. These will be used to split up my network devices into their own logical network, such as IP Cams, IoT devices and Guest WiFi. My current PoE switch was unmanaged, I had to replace this with a managed version. I already had a HP ProCurve ...